Attachments

Most of our charms come with a standard jump ring - a circle of silver about 1/2 cm in diameter with one opening. Use your fingernails or a small pair of pliers to open the jump ring.

Slip the open jump ring through both links of your double-link charm bracelet. Then, slip your charm over an open end of the jump ring.

Close the jump ring with your fingernail or a small pair of pliers. Repeat for each charm. To remove charms, do the steps in reverse. Note: jump rings can come open if they catch on clothing, etc. Before wearing your bracelet, tug on each charm to make sure the rings are still closed.

While most of our charms come with a standard jump ring, we recommend the use of split rings for a more secure bracelet. A split ring is like a small keyring, about 7/10 cm in diameter.

Use your fingernails or a small pair of pliers to open the ring. Split rings are harder to open than jump rings; they are also more difficult to close. Don't open them too wide or you will have a hard time making them fit together properly again.

Slip the open split ring through your charm's attachment ring, then through both links of your double-link charm bracelet. Using a small pair of pliers, rotate the split ring just as you would a key ring until it hangs freely form the bracelet.

Once the split ring hangs freely, it should be almost closed. You can use your fingers or a small pair of pliers if you feel it looks too open. Repeat for each charm. To remove charms, do the steps in reverse.